How to Clean Shark Rotator Vacuum (A Complete Guide)

Is the suction on your Shark vacuum failing? One of the primary causes for this might be how frequently you clean it (or haven’t). While many of us like using our vacuum cleaners, we often overlook them until something wrong happens. That, however, is no longer necessary. Why waste money on repairs and replacements when we need to care for and manage them properly? Shark Vacuum Cleaner will be back to its standard efficient form after following our step-by-step instructions on cleaning a Shark vacuum. Let’s find out how to clean shark rotator vacuum.

How to Clean Shark Rotator Vacuum

How to Clean Shark Rotator Vacuum

There are numerous Shark versions on the market, and the detachable components are most likely situated in different locations. As a result, you’ll need to reference your model-specific manual to figure out where to look for these pieces and how to extract them.

The cleaning procedure is the same and will work for the majority of models. Let’s get this party started.

You will require the following items:

  • Soap.
  • Water and access to a sink or basin are required.
  • A pair of shears
  • Cloth made of microfiber.
  • Brush with a gentle touch.
  • 2 cups of vinegar and three tablespoons of baking soda
  • Gloves to keep your hands safe.

1st Step: Disassemble and unplug

To begin, unplug your vacuum machine. Because there is dirt involved, it is best to clean the vacuum outside. To avoid an untidy heap, lay a sheet or other covering beneath the vacuum whenever feasible.

Remember how the individual components of the main vacuuming component fit back together as you remove them. It will save you time spent finding out which part belongs where.

2nd Step: Remove the dust from the dust container

After that, take the container from the device and place the dirt in a trash bag. Soak the container in soapy water for a few minutes and then wash it with a microfiber cloth. Allow it to air-dry after rinsing it in cold water.

Before reassembling the canister, make sure it is scorched. This might take up to 24 hours.

Keep in mind that reattaching the vacuum while any rinsed parts are still wet might lead to mold growth. As a result, breathing difficulties and other allergic responses may occur.

3rd Step: Filter Cleaning

You’ll discover the filters after removing the dirt container from the more significant vacuuming part. Depending on the type of your Shark vacuum, the filters may be composed of rubber. Felt filters may be used in addition.

Soak the foamy filters in soap and water, then thoroughly wash them. Even after a thorough cleaning, the filters are likely to be discolored. The most crucial thing to keep in mind is that they are cleaned.

Shark does not advocate cleaning felt filters since they are easily destroyed. So, simply lightly tap them to remove the dirt and rinse them clean.

If you want to wash them, wash them in soap and water like their foam versions. However, wash them gently and with care. Remember, you’re doing this entirely at your own risk.

Rinse the soap from the filters, then set them straight to dry for at least twenty-four hours. If the filters are burnt out, it’s a solid indication that it’s time to replace them. Make sure you get a model-specific filter.

For HEPA Filters: Rinse them in soapy water and wipe them as you would any other filter. A HEPA filter, on the other hand, may take longer to dry than other filters.

4th Step: Wipe the Brush Head

The revolving brush grabs ahold of the cleaning, and waste such as hair, threads, and other filth will become trapped on it.

Begin by removing the floor attachments from the handle of your spinning brush. Most versions will feature a switch at either end of the floor attachment. To clean more effectively, press these switches to loosen the brush head.

Snip any tangled trash in the brush with your scissors. Then, try pulling out all of the dirt with your hands, being cautious not to harm the brushes in the process.

To remove obstinate dirt, use a soft brush or wet the brush in water and clean it well. Allow at least 24 hours for the brush to air-dry before reassembling it.

5th Step: Clean out the hose

Examine the hose for any blockages that may be impeding movement. Disconnect the hose at both ends. Examine the ends and the entirety of the hose properly.

If the hose is blocked, turn on the hot water faucet and let it flow. Close one side of the hose with your hands, release it from the tap, and close the other end. Shake the hose vigorously.

Then, in a container, combine the baking soda and vinegar and pour it into the hose. As with the warm water, you’ll need to shield one end and the other with your palm. Shake vigorously for a few minutes.

Allow the mixture to settle before running hot water through the hose, followed by cold water. The baking soda and vinegar mixture unclog the hose and eliminates smells. Furthermore, warm water aids in the loosening and removal of dirt. Allow the hose to dry by laying it flat. Reattach it to the device after it has dried thoroughly.

6th Step: Cleaning Motorized Nozzle

Check the aperture for any obstructions after detaching the hose from the connection. Turn the floor nozzle on its side. Tap it lightly to dislodge any dirt, then remove it with an old toothbrush.

7th Step: Reassemble the vacuum cleaner

The cleaning procedure is nearly complete. Reassemble all of the pieces, taking special care to ensure that each component is thoroughly dry.

With everything in place, wipe down the whole vacuum to ensure the outside is as clean as the inside.

Signs that your Shark vacuum needs to be cleaned

Here are some common signs:

  • Suction power has been reduced.
  • The vacuum has an unpleasant odor.
  • The vacuum makes gasp-like noises.
  • During cleaning, the vacuum leaves dirt behind.

FAQ’s – How to Clean Shark Rotator Vacuum

How do you deep clean a shark vacuum?

Unplug and disassemble the device, Remove the dust canister, empty it, Clean the Filters, Clean out the hose, Remove the Motorized Floor Nozzle, and clean it.

How do you clean the shark rotator speed filter? 

Shark does not recommend washing felt filters since they might be easily damaged. Tap them lightly to remove the dirt and then rinse them clean.

How do I remove the filter from my shark rotator?

To remove, select the Filter access tab. Rinse the filter only with warm water.

Latest posts

Leave a Comment